Digital combi
EP1859-0042
 
EP1859-0042 | 8 x digital input + 8 x digital output 24&nbsp;V&nbsp;DC, I<sub>max</sub> = 0.5&nbsp;A, 3.0&nbsp;ms
EP1859-0042
Connector
assignment
I/O
connection
Labelling areas
Signal status display
M12 I/O connection
sockets
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
1 | Tx+
2 | Rx+
3 | Tx-
4 | Rx-
1 | + 24 V DC Us
2 | Input B
3 | GND
4 | Input A
5 | n. c.
1 | + 24 V DC Us
2 | Output B
3 | GND
4 | Output A
5 | n. c.
1 | GNDP
2 | GNDS
3 | FE
4 | +24 V DC US
5 | +24 V DC UP
Power OUT
Power IN
EtherCAT
signal input 
EtherCAT
signal output 
3-wire  2-wire
extended temperature range
extended shock and vibration range

EP1859-0042 | 8 x digital input + 8 x digital output 24 V DC, Imax = 0.5 A, 3.0 ms

The EP1859-0042 EtherCAT Box combines eight digital inputs (four M12 sockets on the left) and eight digital outputs (four M12 sockets on the right) in one device. The inputs have a filter of 3.0 ms. The outputs process load currents up to 0.5 A, are short-circuit proof and protected against polarity reversal. The state of the signals is indicated by light emitting diodes. The signals are connected via M12 screw type connectors.

The sensors are supplied from the box supply voltage US. The outputs are supplied via UP. The outputs are short-circuit proof and protected against inverse connection.

Technical data EP1859-0042
Specification EN 61131-2, type 1/3
Number of channels 8 inputs + 8 outputs
Input/output connections M12, screw type
Protocol EtherCAT
Bus interface 2 x M12 socket, 4-pin (D-coded)
Input filter 3.0 ms
“0” signal voltage -3…+5 V
“1” signal voltage 11…30 V, 3 mA input current (EN 61131-2, type 1/3)
Sensor supply from control voltage, max. 0.5 A, short-circuit proof in total
Load type ohmic, inductive, lamp load
Rated load voltage 24 V DC (-15 %/+20 %)
Max. output current 0.5 A per channel, individually short-circuit proof
Short-circuit current typ. 1.5 A
Current consumption 120 mA
Auxiliary power current typ. 20 mA + load
Power supply connection feed: 1 x 7/8" plug, 5-pin; downstream connection: 1 x 7/8" socket, 5-pin
Electrical isolation 500 V
Weight approx. 440 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals/markings CE, UL in preparation
Accessories  
ZK1090-6xxx-xxxx Cables for M12 EtherCAT/Ethernet signal in- and -output
ZK2000-6xxx-xxxx Cables for M12 I/O connection sockets
ZK2030-xxxx-xxxx, ZK2031-xxxx-xxxx Cables for 7/8" power supply